fli4l Konfiguration für linphone und sipgate.de

Auszüge aus einer fli4l Konfiguration zur Verwendung von linphone bei sipgate.de:
#------------------------------------------------------------------------------
# Ether networks used with IP protocol:
#------------------------------------------------------------------------------
IP_ETH_N='1'                        # number of ip ethernet networks, usually 1
IP_ETH_1_NAME=''                    # optional: other device name than ethX
IP_ETH_1_IPADDR='192.168.100.1'     # IP address of your n'th ethernet card
IP_ETH_1_NETWORK='192.168.100.0'    # network of your LAN
IP_ETH_1_NETMASK='255.255.255.0'    # netmask of your LAN

#------------------------------------------------------------------------------
# Masquerading:
#------------------------------------------------------------------------------
MASQ_NETWORK='192.168.100.0/24'     # networks to masquerade (e.g. our LAN)
MASQ_MODULE_N='1'                   # load n masq modules (default: only ftp)
MASQ_MODULE_1='ftp'                 # ftp

#------------------------------------------------------------------------------
# Optional package: PORTFW
#
# If you set OPT_PORTFW='yes', you can also edit opt/etc/portfw.sh
#------------------------------------------------------------------------------
OPT_PORTFW='yes'                    # install port forwarding tools/modules
PORTFW_N='5'                        # how many portforwardings to set up
PORTFW_1='22 192.168.100.22 tcp'    # wir nutzen einen sshd
PORTFW_2='80 192.168.100.22 tcp'    # und einen Webserver
PORTFW_3='5004 192.168.100.22 udp'  # linphone RTP, siehe linphone Preferences
PORTFW_4='5060 192.168.100.22 udp'  # das ist fuer SIP
PORTFW_5='6000 192.168.100.22 tcp'  # das ist nur X11