Die Weiterleitung der Ports 5004 und 5060 zeigt der Auszug aus einer
fli4l Konfiguration:
#------------------------------------------------------------------------- # Ether networks used with IP protocol: #------------------------------------------------------------------------- IP_ETH_N='1' # number of ip ethernet networks, usually 1 IP_ETH_1_NAME='' # optional: other device name than ethX IP_ETH_1_IPADDR='10.0.0.1' # IP address of your n'th ethernet card IP_ETH_1_NETWORK='10.0.0.0' # network of your LAN IP_ETH_1_NETMASK='255.255.255.0' # netmask of your LAN #------------------------------------------------------------------------- # Masquerading: #------------------------------------------------------------------------- MASQ_NETWORK='10.0.0.0/24' # networks to masquerade (e.g. our LAN) MASQ_MODULE_N='1' # load n masq modules (default: only ftp) MASQ_MODULE_1='ftp' # ftp #------------------------------------------------------------------------- # Optional package: PORTFW # # If you set OPT_PORTFW='yes', you can also edit opt/etc/portfw.sh #------------------------------------------------------------------------- OPT_PORTFW='yes' # install port forwarding tools/modules PORTFW_N='5' # how many portforwardings to set up PORTFW_1='22 10.0.0.22 tcp' # wir nutzen einen sshd PORTFW_2='80 10.0.0.22 tcp' # und einen Webserver PORTFW_3='5004 10.0.0.22 udp' # linphone RTP, siehe linphone Preferences PORTFW_4='5060 10.0.0.22 udp' # das ist fuer SIP PORTFW_5='6000 10.0.0.22 tcp' # das ist nur X11
http://www.tuxad.com/voip-fli4l-config.html 2009-09-09
Copyright © 2004-2012 Frank W. Bergmann.
Alle Rechte vorbehalten.